We ship North America Wide! | 
Product Description
NEW AIR DISC CALIPER – MAXX22T WITH CARRIER (RH)
DESCRIPTION:
Model: WABCO MAXX22T
Vehicles: Hendrickson Intraax & Vantraax Trailer Axles
• Brake Side: Left-Hand (RH)
• Caliper Type: Air disc with integrated wide-mount carrier
• Mounting Style: 0° axial mount (Type A), Hendrickson-specific
• Bolt Pattern: 6x M18 x 2.5 bolts, 205 mm vertical × 170 mm horizontal
• Mounting Offset: 0° (parallel to axle)
• Brake Pad Compatibility: RADN2061 (WABCO ADB2061, ESD2061, ATD2061HD)
• Compatible Rotor: RAD76471 (WABCO S-38765, 430 mm OD, 43 mm thickness)
• Recommended Pin Kit: RAD30257
• Compatible Spring Brakes: RADK041960
• Port Configuration: Dual M12×1.0 inverted flare
• Technology: WABCO MAXX22T platform, SAE J560 ABS sensor compatible
• System Integrity: OEM-spec, FMVSS 121 compliant, 32,000 lb axle rating
• Weight: 30.8 kg (68 lbs)
Applications:
Exclusively engineered for LH wheel ends on trailers equipped with Hendrickson Intraax or Vantraax suspensions using WABCO MAXX22T calipers. Common on Utility 4000D/4000E flatbeds, Great Dane reefers, Wabash DuraPlate vans, and Vanguard flatdecks. Compatible with HAULMAAX, INTRAAX L/S, and VANTRAAX L/S axle systems.
CROSS-REFERENCE(S):
6402220060, 6402220080, 6402220080NX, 650-6402220080NX, M6402220080X, 650-M6402220080X, 815-6402220080, H-24701RH, 2915214, 336473, 158.197322TR, 158197322TR, S-35303-8, S353038, S35973R, S-35973-R, RDB012341CX, RDB012341CXCV, RDB012341CXHD, 3080005900, 5362706310, MXC9103073, CTLW080RN, TP6402220060, FIP6402220060, BW-NSI, BADC03R, ATCAD2003, GBADC3887, 22XK802984A, RPD6402220060, SP6402220060, 25508630, 325799151298, FP6402220060WCX, FP6402220060WC-G
A cross-reference listing means this part may be a compatible replacement for these part numbers based on OEM or distributor data.
IMPORTANT INSTALLATION NOTES:
✔ Use only on Hendrickson Intraax/Vantraax axles with LH MAXX22T configuration
✔ Replace both LH and RH calipers at the same time for optimal performance
✔ Clean and prep the caliper mounting surface; ensure it is flat and free of corrosion
✔ Mount the caliper and torque fasteners to OEM specifications
✔ Turn the adjuster COUNTER-CLOCKWISE until the brake pads just contact the rotor (avoid over-tightening)
✔ Then turn CLOCKWISE 1/4 turn to set clearance
✔ Confirm system air pressure is between 100–120 psi
✔ Block and secure wheels to prevent any movement
✔ Depress the emergency brake release button on the dash to release spring brakes
✔ Only after the wheels are secure and spring brakes are released should you proceed with caliper adjustment
