RM-60-NK - Reverse-A-Matic RM-60 NO KIT *Module Only w\ Emergency Lift (RU2-200566-NK)

The Reverse-A-Matic™ trailer direction sensing system is a stand alone device that is independent of the cab. The Reverse-A-Matic™ system automatically locks and/or lifts a self-steer axle. The RM-60 Lift Axlefunction will also lift...

RM-60 - Reverse-A-Matic RM-60 Kit w\ Emergency Lift (RU2-200506-OEM)

The Reverse-A-Matic™ trailer direction sensing system is a stand alone device that is independent of the cab. The Reverse-A-Matic™ system automatically locks and/or lifts a self-steer axle. The RM-60 Lift Axle function will...

RM-200812 - Disc Brake Sensor (RA0-200812)

  WHEEL SENSOR (AL200812) - Disc Brakes Used for measuring speed and direction Mandatory part for the RM-50, RM-60, Proviso 88P, and Proviso Plus models  

RM-200577 - Re-Setable Fuse (RA0-200577) *RM-60 accessory

RM-200576 - Harness - RM-60 - 7 Bullet - 12 ' LONG *RM-60 accessory (RA0-200576)

RM-200567 - Sensor Extention Cable 10ft (RA0-200567)

RM-200564 - Male 4 way lift cable (12") - *RM-60 accessory (RA0-200564)

Four pin Weather pac male connector has four 12" leads to the same functions as the 50' extension.  This connector allows the installer to make up their own harness.  

RM-200524 - Harness -LP Sensor (Daisy Chain)- (10 ft) *RM-60 accessory (RA0-200524)

10 ft lead cable with double 180 deg female molded bullets on one end and molded male bullets on the other end. (air tank psi monitoring option only)

RM-200521 - Harness - RM-60 - 7 Bullet *RM-60 accessory (RMDWH-4108) (RA0-200521)

No cutting or splicing is required.  Simply "T" into the main trailer harness. Colour coded molded 180 bullet plug into the module.  12" Cable length.  

RM-200519 - Low Pressure Sensor - 75 psi *RM-60 accessory (RA0-200519)

75PSI AIR PRESSURE SENSOR (AL200519) Used for detecting low pressure on supply tanks Normally used with the RM-60 to meet the enhanced Brake requirements of SPIF on 5 and 6 axle trailers Brake air tank PSI sensor (NC) with male Delphi connector trips at...

RM-200518 - Harness - Low Pressure Sensor (3 ft) *RM-60 accessory (RA0-200518)

AIR PRESSURE SENSOR CABLE (AL200518) - 3' Long Used for connecting the 75psi sensor to the daisy chain cable Normally used with the RM-60 to meet the enhanced Brake requirements of SPIF on 5 and 6 axle trailers 3 ft two lead calbe with molded male...

RM-200517- Block Clip (RA0-200517)

  WHEEL SENSOR CLIP (AL200517) Used for holding the Wheel Sensor into the Wheel Sensor Block Required part for the RM-50, RM-60, Proviso 88P, and Proviso Plus models